Genaral Characteristic£º
Frame number£¨mm£© | Working voltage£¨VAC£© | Rated speed£¨rpm£© | Maximum speed£¨rpm£© | Rated power£¨kW£© | Rated torque£¨Nm£© |
40~180 | 220/380 | 1000~3000 | - | 0.05~7.5 | 0.16~48 |
Insulation class | Installation mode | Pole pairs | Temperature | Humidity | Safety class |
B/F | Flange | 4 | -20~40¡æ | Less than 90% (No condensation) | IP65 |
60ST AC Servo Motor Details:
Type: 60ST-M00630 / 60ST-M01330 / 60ST-M01930 AC servo motor
Rated Power: 0.2KW / 0.4KW / 0.6KW
Rated voltage: 220V
Rated current: 1.5A / 2.8A / 3.5A
Rated speed :3000RPM
Rated torque: 0.637N.m / 1.3N.m / 1.9N.m
Encoder Line Number: 2500PPR
Installation dimensions:
Motor type | 60ST-M00630 | 60ST-M01330 | 60ST-M01930 | ||||
L(mm)£¨Without brake£© | 116 | 139.5 | 169 | ||||
L(mm)£¨With permanent magnet brake£© | 164 | 189 | 217 |
60mm AC Servo Motor Parameters:
Motor type | 60ST - M00630 | 60ST - M01330 | 60ST - M01930 | |||
Rated power£¨W£© | 200 | 400 | 600 | |||
Rated voltage£¨V£© | 220 | 220 | 220 | |||
Rated current£¨A£© | 1.2 | 2.8 | 3.5 | |||
Rated speed£¨rpm£© | 3000 | 3000 | 3000 | |||
Rated torque£¨N.m£© | 0.637 | 1.27 | 1.91 | |||
Peak torque£¨N.m£© | 1.91 | 3.9 | 5.73 | |||
Voltage constant£¨V/Krpm£© | 30.9 | 29.6 | 34 | |||
Torque coefficient£¨N.m/A£© | 0.53 | 0.45 | 0.55 | |||
Rotor inertia£¨Kg.m2£© | 0.175¡Á10-4 | 0.29¡Á10-4 | 0.39¡Á10-4 | |||
Line-Line resistace (¦¸) | 6.18 | 2.35 | 1.93 | |||
Line-Line inductance£¨mH£© | 29.3 | 14.5 | 10.7 | |||
Electrical time constant£¨ms£© | 4.74 | 6.17 | 5.5 | |||
Weight£¨Kg£© | 1.16 | 1.6 | 2.07 | |||
Insulation class | Class F |
60ST AC Servo Motor Dimensions:
AC Servo Motor Features:
1¡¢Design scheme: adopt a new electromagnetic design scheme, lower temperature rise, small motor inertia
2¡¢Application areas: robotics, 3C and other consumer electronics industries
Related Servo Motor Driver Parameters£º
1¡¢Input voltage: Single-phase or three-phase 220~ 380VAC ( -15~+10%), 50~60HZ
2¡¢Control mode: Position control, speed control, torque control
3¡¢Type of encoder: 2500-line incremental type photoelectric encoder ,23-bit absolute value encoder
4¡¢Communication method: RS485, RS232, CANopen, standard MODBUS communication
3¡¢Input and output points: IO programmable supports positive and negative logic settings and function of relocation, 4-channel input supports 16 functions configuration, 3-channel output supports 12 functions configuration
4¡¢Monitoring capabilities: Provide 16 states monitor like location, speed, current, voltage, input and output
Rated 220V output power reference table:
Code | 04 | 08 | 15 | 22 | 30 | 50 |
Output power | 0.4kW | 0.75kW | 1.5kW | 2.2kW | 3kW | 5kW |
Rated 380V output power reference table:
Code | 15 | 25 | 35 | 55 | 75 |
Output power | 1.5kW | 2.5kW | 3.5kW | 5.5kW | 7.5kW |
Servo Motor Driver Dimensions:
Servo Motor Driver Features:
1¡¢Small in volume and compact in size, which greatly saves the installation space
2¡¢Strong internal position model can plan multi-path in continuous operation, so as to achieve rich motion control function; support 32 sets of data programming at most, each of which can set pulse numbers or angle according to needs, and can set the speed , acceleration, deceleration and emergent deceleration
3¡¢Automatically measure the mechanical properties of load inertia, configure optimal gain, reduce the commissioning time of the system
4¡¢Make analysis of mechanical resonance frequency, configure 2 sets of notch filters, which can adjust frequency (50~ 5000Hz) and notch depth, effectively overcome low frequency resonance and vibration of mechanical end, and can set vibration frequency (1~100Hz) and vibration damping
5¡¢The function of friction torque compensation can reduce the effect of static friction force during mechanical reversal, and improve tracking performance of instructions operating at low speed
6¡¢Support debugging software, able to make analysis of mechanical properties, set parameters and conduct surveillance, simple and intuitive to operate.
Customized Design:
If this motor do not match with your request. Please feel free to contact with us,We can make customized shaft / winding / mounting flange / cable / connector / Encoder / Brake / Gearbox and others. We will works side-by-side with you and your team to design a motor that will fit the precise needs of your application. All Engineering and Support is done in-house.