Genaral Characteristic£º
Frame number£¨mm£© | Working voltage£¨VAC£© | Rated speed£¨rpm£© | Maximum speed£¨rpm£© | Rated power£¨kW£© | Rated torque£¨Nm£© |
40~180 | 220/380 | 1000~3000 | - | 0.05~7.5 | 0.16~48 |
Insulation class | Installation mode | Pole pairs | Temperature | Humidity | Safety class |
B/F | Flange | 4 | -20~40¡æ | Less than 90% (No condensation) | IP65 |
80ST AC Servo Motor Feature:
Type: 80ST-M01330 / 80ST-M02430 / 80ST-M03520 / 80ST-M04025 AC servo motor
Rated Power: 0.4KW / 0.75KW / 0.73KW / 1KW
Rated voltage: 220V
Rated current: 2A / 3A / 4.4A
Rated speed :3000RPM / 2000RPM / 2500RPM
Rated torque: 1.3N.m / 2.39N.m / 3.5N.m / 4N.m
Encoder Line Number: 2500PPR
Installation dimensions:
Motor type | 80ST-M01330 | 80ST-M02430 | 80ST-M03520 | 80ST-M04025 | |||||
L(mm)£¨Without brake£© | 124 | 151 | 179 | 191 | |||||
L(mm)£¨With permanent magnet brake£© | 178 | 205 | 233 | 245 | |||||
L(mm) With electromagnetic break | 164 | 191 | 219 | 231 |
80mm AC Servo Motor Parameters:
Motor type | 80ST ¨C M01330 | 80ST ¨C M02430 | 80ST ¨C M03520 | 80ST ¨C M04025 | ||||
Rated power£¨W£© | 0.4 | 0.75 | 0.73 | 1.0 | ||||
Rated voltage£¨V£© | 220 | 220 | 220 | 220 | ||||
Rated current£¨A£© | 2 | 3.0 | 3.0 | 4.4 | ||||
Rated speed£¨rpm£© | 3000 | 3000 | 2000 | 2500 | ||||
Rated torque£¨N.m£© | 1.27 | 2.39 | 3.5 | 4.0 | ||||
Peak torque£¨N.m£© | 3.8 | 7.1 | 10.5 | 12 | ||||
Peak current£¨A£© | 6 | 9 | 9 | 13.2 | ||||
Voltage constant£¨V/Krpm£© | 40 | 48 | 71 | 56 | ||||
Torque coefficient£¨N.m/A£© | 0.64 | 0.8 | 1.17 | 0.9 | ||||
Rotor inertia£¨Kg.m2£© | 1.05¡Á10-4 | 1.82¡Á10-4 | 2.63¡Á10-4 | 2.97¡Á10-4 | ||||
Line-Line resistace (¦¸) | 4.44 | 2.88 | 3.65 | 1.83 | ||||
Line-Line inductance£¨mH£© | 7.93 | 6.4 | 8.8 | 4.72 | ||||
Electrical time constant£¨ms£© | 1.66 | 2.22 | 2.4 | 2.58 | ||||
Weight£¨Kg£© | 1.78 | 2.86 | 3.9 | 4.1 | ||||
Insulation class | Class F |
80ST AC Servo Motor Dimensions:
AC Servo Motor Features:
1¡¢Design scheme: adopt a new electromagnetic design scheme, lower temperature rise, small motor inertia
2¡¢Application areas: robotics, 3C and other consumer electronics industries
Related Servo Motor Drivers Parameters£º
1¡¢Input voltage: Single-phase or three-phase 220~ 380VAC ( -15~+10%), 50~60HZ
2¡¢Control mode: Position control, speed control, torque control
3¡¢Type of encoder: 2500-line incremental type photoelectric encoder ,23-bit absolute value encoder
4¡¢Communication method: RS485, RS232, CANopen, standard MODBUS communication
3¡¢Input and output points: IO programmable supports positive and negative logic settings and function of relocation, 4-channel input supports 16 functions configuration, 3-channel output supports 12 functions configuration
4¡¢Monitoring capabilities: Provide 16 states monitor like location, speed, current, voltage, input and output
Rated 220V output power reference table:
Code | 04 | 08 | 15 | 22 | 30 | 50 |
Output power | 0.4kW | 0.75kW | 1.5kW | 2.2kW | 3kW | 5kW |
Rated 380V output power reference table:
Code | 15 | 25 | 35 | 55 | 75 |
Output power | 1.5kW | 2.5kW | 3.5kW | 5.5kW | 7.5kW |
Servo Motor Driver Dimensions:
Servo Driver Features:
1¡¢Small in volume and compact in size, which greatly saves the installation space
2¡¢Strong internal position model can plan multi-path in continuous operation, so as to achieve rich motion control function; support 32 sets of data programming at most, each of which can set pulse numbers or angle according to needs, and can set the speed , acceleration, deceleration and emergent deceleration
3¡¢Automatically measure the mechanical properties of load inertia, configure optimal gain, reduce the commissioning time of the system
4¡¢Make analysis of mechanical resonance frequency, configure 2 sets of notch filters, which can adjust frequency (50~ 5000Hz) and notch depth, effectively overcome low frequency resonance and vibration of mechanical end, and can set vibration frequency (1~100Hz) and vibration damping
5¡¢The function of friction torque compensation can reduce the effect of static friction force during mechanical reversal, and improve tracking performance of instructions operating at low speed
6¡¢Support debugging software, able to make analysis of mechanical properties, set parameters and conduct surveillance, simple and intuitive to operate.
Customized Design:
If this motor do not match with your request. Please feel free to contact with us,We can make customized shaft / winding / mounting flange / cable / connector / Encoder / Brake / Gearbox and others. We will works side-by-side with you and your team to design a motor that will fit the precise needs of your application. All Engineering and Support is done in-house.